What is High Bay Light? Everything You Have to Know

What does “high-bay lighting” imply if you’re planning a lighting retrofit for your organization? This week’s piece will cover the intricacies of high-bay lighting, where it’s used, and how it matches up against the competition. High bay lighting is most often used in big indoor spaces with a lot of floor space that needs to be lighted. Enormous manufacturing facilities, gymnasiums, warehouses, large retail shops, factories, and the like are all examples of large spaces. Hire services from the best high bay light manufacturers¬†out there.

It’s not unusual for a space like this to have a lot of vertical and horizontal space covered. Therefore, there must be lighting that can produce enough foot candles to illuminate this area adequately. For this type of facility, high bay lights are the most common type of lighting. Here’s all you need to know about High Bay Light!

Why Should You Pick LED High Bay lights?

Various lighting systems were and still are employed when high bay lights were needed in warehouses and factories. Of course, there are advantages to using conventional incandescent light bulbs, but industrial LED lighting¬†beats them in crucial respects. Nevertheless, a warehouse or industrial area can benefit from an LED conversion from the best high bay light manufacturers, so let’s have a look:

  • Metal halide high bay lights vs. LED industrial lighting: There is a good chance you’ve seen metal halide lighting during a baseball game. Sporting and warehouse/industrial applications are prominent usage for MH lights (as well as any setting where giant, high spaces need to be illuminated). Color rendering and foot-candle levels are among the advantages of MH lights (as opposed to other types of conventional bulbs). Their main negatives are a long warm-up time, a high maintenance cost, and they can flicker on and off.
  • HPS lights vs. LEDs: Which is better for high bay lighting? It is common for high bay lights to be utilized in warehouses and other commercial or industrial sites. Their advantages include a low cost of purchase, good energy efficiency (low operating expenses), and a long lifespan. On the other hand, LED high bay lighting has all three advantages over HPS lighting technology. HPS bulbshave a long warm-up time and the weakest color rendering on the market. See how LEDs stack up against other lighting options like high- and low-pressure sodium (HPS/LPS).
  • In some cases, fluorescent lighting is still used in warehouses and other industrial settings, even though it is less prevalent than LED lighting (primarily T12, T8, and T5 lights). Fluorescent lights provide advantages over incandescent bulbs, including lower beginning costs and a relatively high-efficiency level (especially when compared to other conventional bulbs). On the negative side, there’s the hazardous mercury (which means unique waste disposal methods are needed), shorter lifespan when turned on/off frequently, and the need for ballast to keep the light steady.

What are the three most important reasons to use LED lighting?

It’s no secret that LED lighting has surpassed the capabilities of conventional lighting in crucial respects. Additionally, LED lighting has three universal advantages that may be applied to any lighting project.

Maintenance costs are reduced.

LED lights, as previously mentioned, have a lifespan four to forty times greater than typical standard bulbs. This reduces the number of bulbs that need to be replaced. As a response, fewer parts will need to be repaired or replaced because there are fewer moving parts. Consideration for maintenance is critical when it comes to industrial lighting or warehouse lighting. As a rule of thumb, changing a high bay light bulb takes specialist equipment or creative thinking.

The lighting has been upgraded.

Simply put, industrial LED lighting, such as high bay lights, will often perform better head-to-head comparisons regarding CRI, CCT, and foot candles than other bulbs. This is because the color rendering index (CRI) measures how well a light source readily reveals an object’s actual color to an ideal light source.

Enhanced effectiveness in terms of utilizing energy.

LED lights may create light in various ways and use less energy per unit of light than other types of lighting. That’s a little confusing. Traditional lights waste a lot of energy by producing heat, which is why LEDs are becoming more popular in recent years. This means that omnidirectional lighting is the most common type of conventional lighting.

Summing Up!

There are numerous advantages to using high bay lighting in large interior spaces, such as factories and warehouses. Ceilings of at least 15 feet high are ideal for these lights. Because the lighting must illuminate the vertical and horizontal planes in this space, large Lumen output lamps are frequently required. Many high-bay lighting fixtures employ diffused light sources to reduce glare. Because of this, they are a common and preferred option for many people.

Leave a Reply