If your carpet is looking particularly dirty in the worst place, don’t worry. You can still clean it without a machine and get it looking like new. Try using a wet microfiber cloth to remove stubborn stains and deep-set dirt particles from your carpet, or use a vacuum cleaner with an attached brush attachment to vacuum up dirt before you wipe away the dust. If that doesn’t work, rinse and wring out some distilled water and wet down your carpet again before vacuuming with the brush attachment once more.
In this blog you will get to know how you can clean your carpet without machine and Carpet Cleaning Guide from the Experts.
The trick to getting your carpet clean is to use enough water to loosen the dirt without soaking the carpet. You want to drench it, not drown it. If you do get too much water on your rugs, blot them up right away. If you leave the extra water on there, your carpet will stay wet for a long time and start to smell musty.
An alternative method of cleaning carpet is using hydrogen peroxide with salt and dish soap. Make a paste with the hydrogen peroxide and salt, then add a few drops of dish soap and apply it to your dirty carpet. Allow it to sit for about 5 minutes before scrubbing it into the fabric with a brush or sponge. These method will be very helpful for you instead of using carpet cleaners like r mat cleaner.
The basic rules to cleaning carpet without a machine are:
- It should be wet
- It shouldn’t be too wet
- Use a lot of water
- Use a cloth and brush, not a mop
- Apply the solution to the carpet rather than directly to your hands
The result will be visibly dirtier, but your carpets will look clean and fresh again
Spot Cleaning Carpets without a Machine
If you’re looking for a quick way to get your carpets clean, here’s what you can do:
Use a thick white towel or rug pad and ring out most of the water before you start. Put down the towel and repeat this process several times until most of the water is gone.
Using a sponge mop, wet your carpet and then vacuum with it. Then dampen your mop again with water before moving on to use it on the next section of rug. If you have more than one area to clean, simply cover them in blankets or towels and start from there when cleaning each section.
Carpet spot cleaning can be a tedious and time-consuming chore, but don’t worry, there are other solutions. One of the best solutions is to get a spotless carpet by hand. You can easily accomplish this task by following these simple steps:
1- Wet your cloth (any type of cloth) in water and vinegar and wring out excess liquid.
2- Spread spot remover on the wet surface then roll up the cloth tightly into a ball to soak up any remaining product before spreading it over the entire area being cleaned.
3- Place a dry clean cloth on top of the wet one then carefully rub in circular motions using firm pressure with the dry part of your hands.
4- Remove the cloths when no more liquid is being extracted from the carpet surface.
This method is ideal for removing stains from carpet without scrubbing and without using a machine or chemicals. It is also an affordable option that can easily be done by yourself in the comfort of your own home.
5- You can also clean grease and oil off your clothing using a similar method. Mix a detergent or dish soap with water and vinegar, then put it on your cloth, roll it into a ball, apply it to the stains, rub firmly and rinse once with warm water.
7- Use paper towels if you are working on small areas like furniture legs or walls.