Don’t Panic! Here’s How Much Insulation Your Home Needs

Insulation is a very important part of your home’s overall energy efficiency – and it goes a long way in helping your family stay comfortable and save money. However, the amount of insulation needed for a home depends on many factors: your climate, how much square footage you have, and what type of heating system you might have. This article will provide you with the information you need to make an informed decision about what kind of insulation to buy for your family’s new home.


Why Does My Home Need Insulation?


Insulation is one of the most important aspects of home heating and cooling. Your home needs insulation to keep the heat or cold out, and in turn, save you money on your energy bill. Here are some reasons why your home might need insulation:


Your home was built in a cooler climate.


Your home was built in a warmer climate.


You have a high-efficiency furnace or air conditioner.


Your home has more than one story.


Your roof is made of metal, fiberglass, or another type of material that doesn’t insulate well.


If you’re not sure whether or not your home needs insulation, contact an energy advisor to find out what would be best for you.


How to Calculate the R Value of Your Insulation


There is no one definitive answer to this question, as the amount of insulation required for your specific home varies depending on the climate and materials used in construction. However, calculating the R value of insulation can provide you with a general guideline.


To calculate the R value of insulation, first identify the type of insulation being used (e.g. fiberglass, cellulose, etc.). Then use the table below to find out how much insulation do I need. cubic feet of material is required to insulate a specific area using that type of insulation.


Type of Insulation 

 Cubic Feet Required per Square Foot Insulated

      Cellulose 0.7 Fiberglass 2.0 Gypsum Board 1.5 Mineral Wool 2.0 OSB (Oriented Strand Board) 2.5 Spray Foam 3.5


The Difference in R Value Between Different Types of Insulations


When it comes to insulation, there’s a lot of confusion out there. Different types of insulation are marketed as being better for different reasons, and many homeowners don’t even know what the right amount is for their home. In this blog post, we’ll demystify the different types of insulation and explain how they work.


First things first: Insulation matters because it helps keep your home warm in winter and cool in summer. The R-value (a measure of thermal resistance) tells you how effective an insulation material is at resisting heat flow. The higher the R-value, the more effective the insulation material will be at keeping your house cool or warm.


The three main types of insulation are:


R-Value: This is a measure of thermal resistance and tells you how effective an insulation material is at resisting heat flow. The higher the R-value, the more effective the insulation material will be at keeping your house cool or warm. 


Fiberglass: Fiberglass is made up of small glass fibers that are bonded together to create a blanket-like material. Fiberglass provides good thermal resistance but can be expensive and difficult to install. 


What Types of Materials Are Available for Home Insulation?


Insulation is the key to keeping your home warm in the winter and cool in the summer. The right insulation can also help to save on energy bills. 


There are a number of different types of insulation available, so it’s important to choose the right one for your home. Below are some of the most common types:


Cellulose insulation is made from cotton, wool, or other plant fibers that have been treated with an adhesive and then formed into a blanket or sheet. Cellulose insulation is cheap and effective, but it can be noisy when installed.


Fiberglass batts are made from chopped glass fibers that have been heated until they fuse together. This creates a strong and lightweight material that is both sound- and fire-resistant. Fiberglass batt insulation can be expensive, but it lasts longer than other types of insulation.


Spray foam is a type of insulation made from a hot gas that is forced into small bubbles. When the gas cools, it forms a hard foam that can provide thermal protection for walls and ceilings informatics commerce. Spray foam is fast and easy to install, but it’s not as durable as other types of insulation.


Tips for Choosing a Material for Home Insulation


If you’re debating insulation for your home, there are a few things to keep in mind. First, choose the material based on how effective it will be at keeping your home warm and insulated. Second, make sure you have enough of it. And finally, be prepared to pay for it. Here’s a rundown of the different types of insulation and their respective costs: 


Type of Insulation Cost per Square Foot


R-19 Fiberglass Insulation $3-$6 per square foot


R-22 Fiberglass Insulation $7-$11 per square foot


R-38 Fiberglass Insulation $10-$15 per square foot


SPF 50 Polyurethane Foam Insulation $20-$30 per square foot


Leave a Comment